![]() ![]() Jeep TJ / LJ / XJ / ZJ / MJ Death Wobble Checklist.Jeep JL / JLU / JT Death Wobble Checklist. ![]() Coil Springs, Bump Stops, & Accessories.(1) 8858-30 Rear Bumpstop Extension, 3.Synergy Jeep JK / JKU Steering Kit | SYNERGY MANUFACTURING (1) 8056-RHD Rear Track Bar Bracket (RHD) (1) 8038 Rear Long Arm Upper Control Arms (1) 8036 Rear Long Arm Lower Control Arms (1) 8035 Front Long Arm Upper Control Arms (1) 8033 Front Long Arm Lower Control Arms (1) 8858-30 Rear Bumpstop Extension, 3.0 Tall Request one size shorter rear springs to level the vehicle out when unloaded Springs retain the factory rake of the vehicle where the rear is higher than the front.The transmission cross member is located further back on diesel models and the front long arm brackets will not sit flush to the cross member Diesel models will require a set of spacers to be fabricated for installation.2012+ JK's lifted over 2" will require exhaust spacers ( 5017), or a front aftermarket drive shaft to prevent interference with the exhaust.Available For Right Hand Drive (RHD) Vehicles.Synergy suspension systems are a modular design so all components are available separately.Requires a maximum 4-3/4" backspace wheel or wheel spacer with factory wheel setup.100% bolt on components assure an easy, trouble free installation with the use of basic hand tools.Suspension components feature an abrasion-resistant powder coat finish for maximum durability and corrosion resistance.Progressive wound coil spring manufactured using the latest in CNC hot winding technology keeps spring from coming unbound at full suspension droop.Optional front sway bar disconnect system for ultimate trail articulation mounts sway bar up and out of the way when disconnected from the axle.Features Synergy Dual Durometer Bushings (DDB) with TeflonĀ® bearing surface for a maintenance free design focusing on performance, flex, longevity, and ride quality.Lower control arms are manufactured from high quality crush resistant 2" X.Front and rear track bar relocation brackets raise track bar mounting positions increasing suspension roll center heights which improves handling on and off road.Synergy double adjuster sleeve & pinch bolt assembly allows for adjustment of control arm, track bar, tie rod, and drag link length without removal.Front and rear extended stainless steel braided brake lines.Front and rear bump stop extension kits.Stage 4 key features are front and rear track bar relocation brackets, flipped drag link, and all adjustable upper & lower long arms.Synergy Suspension Jeep JK Stage 4 Synergy Long Arm Suspension System This system will fit 35" tires with stock fenders or 37" tires with high fenders. This is a 100% bolt on system with no welding required. It carries over the quality components of the Stage 3 System, but improves upon them by swapping out the Standard Length Control Arms for Adjustable Long Arms and Long Arm Mounting Brackets. The Stage 4 System is for those wanting maximum performance and capability without sacrificing ride quality. Synergy Jeep JK Stage 4 Long Arm Suspension System, 3" Lift | SYNERGY MANUFACTURING ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |